| 【宏萊電子】Lutron PDT-2250+PX-01 轉速設定顯示表+近接開關
客訂商品若無現貨,交期較長或缺貨,會有專人與您聯繫說明 1.測量範圍：5RPM～99999RPM 2.可切換線速度測量(ft/min或m/min) 3.上/下限範圍設定及警報設定功能 4.上/下限及警報設定繼電器輸出 5.工作電源：AC90～264V(50/60Hz) 6.可選購近接開關PX-01或光電開關PI-06 7.RS-232(UPCB-02)/USB(USB-01)連接介面(軟體選購) => (電腦連接線、軟體SW-U801皆需另外購買). 8.Size：96(L)x48(W)x107(H)mm Lutron PX-01近接開關 1.輸出：PNP.NO(常開接點) 2.感應方式：垂直感測 3.感應距離：4 mm 4.操作電壓：10-30 VDC,Out-12 DCV 100 mA。 5.感應目標物最小尺寸：Iron 18x18x1 mm 6.反應時間：最高600Hz 7.線長：1M 近接磁性物體時,發送感應訊號之轉速感應器, 當轉軸有類似鐵螺絲之凸出磁性物件,接近電磁轉速感應器時,感應器會產生脈衝電壓訊號,送交轉速表, 經由時間參數之運算,而顯示出轉速 * DT-2240D，PDT-2250，TR-RPM1A4傳感器或位置檢測。          |
| 【宏萊電子】Lutron PDT-2250+PX-01 轉速設定顯示表+近接開關
客訂商品若無現貨,交期較長或缺貨,會有專人與您聯繫說明 1.測量範圍：5RPM～99999RPM 2.可切換線速度測量(ft/min或m/min) 3.上/下限範圍設定及警報設定功能 4.上/下限及警報設定繼電器輸出 5.工作電源：AC90～264V(50/60Hz) 6.可選購近接開關PX-01或光電開關PI-06 7.RS-232(UPCB-02)/USB(USB-01)連接介面(軟體選購) => (電腦連接線、軟體SW-U801皆需另外購買). 8.Size：96(L)x48(W)x107(H)mm Lutron PX-01近接開關 1.輸出：PNP.NO(常開接點) 2.感應方式：垂直感測 3.感應距離：4 mm 4.操作電壓：10-30 VDC,Out-12 DCV 100 mA。 5.感應目標物最小尺寸：Iron 18x18x1 mm 6.反應時間：最高600Hz 7.線長：1M 近接磁性物體時,發送感應訊號之轉速感應器, 當轉軸有類似鐵螺絲之凸出磁性物件,接近電磁轉速感應器時,感應器會產生脈衝電壓訊號,送交轉速表, 經由時間參數之運算,而顯示出轉速 * DT-2240D，PDT-2250，TR-RPM1A4傳感器或位置檢測。 FEATURES Professional Tachometer ( RPM, m/min., ft/min. ) monitor and controller. Build in control relay and the alarm relay. Alarm Relay will make action when the reading value reach to high/low alarm value. Control Relay will make action when the reading value reach to control value. Hysteresis value setting for control and alarm function. Can set input pulse no. of each round. Can set the roller's diameter for the surface speed ( m/min., ft/min. ) function. Can cooperate the optional proximity sensor or photo sensor. Large red LED display, high brightness and easy to read. RS232 computer interface. Microprocessor circuit ensures high accuracy and provides special functions and features. Standard 96 X 48 mm DIN case. Optional data acquisition software. Optional GSM controller. 一般規格 顯示 (Display) 4 digits red LED, digit size : 14 mm. 單位 (Unit) RPM Surface speed : m/min ( meter per min. ) ; ft/min ( feet per min. ) 電路 (Circuit) Custom chip of microprocessor LSI circuit. 取樣時間 (Sampling Time) Approx. 1 second. * Input : one pulse per round, ≧60 RPM 繼電器輸出 (Relay Output) Number : 2 relays Function : Relay 1 : Control relay. Relay 2 : High/Low alarm relay. Max load : 1 ACA/250 ACV ; 1 DCA/24 DCV 設定值 (Setting Value) Control value setting Alarm high limit value setting Alarm low limit value setting Pulse no. of each round Roller diameter value setting Hysteresis value setting 輸入訊號 (Input Signal) Pulse 時基 (Input Signal) Quartz crystal 外部電源供應 (External Power Supply) DC 12 V, 50 mA max. 資料輸出 (Data Output) RS 232 PC serial interface. 操作溫度 (Operating Temperature) 0 to 50 ℃. 操作溼度 (Operating Humidity) Less than 80% R.H. 電源供應 (Power Supply) 90 to 260 ACV, 50/60 Hz. 重量 (Weight) 384 g/ 0.84 LB. 電源損耗 (Power Consumption) Approx. 4.7 VA/AC 110V Approx. 5.3 VA/AC 220V. 體積大小 (Dimension) DIN size : 96 x 48 mm. Depth : 110 mm. 附件 (Accessories Included) Instruction manual......................1 PC Case holder with screw................. 2 PCs 選購附件 (Optional Accessories) Proximity sensor, PX-01. Photo sensor, PI-06. Data Acquisition software, SW-U801-WIN. RS232 cable, UPCB-02. USB cable, USB-01. GSM controller, GSM-889. Interface cable ( cable between meter to GSM-889 ), GMCB-89. 電器規格 (23±5 ℃) 範圍 (Range) Photo Tachometer : 10 to 99,999 RPM Surface Speed ( m/min. ) : 0.05 to 9,999 m/min. Surface Speed ( ft/min. ) : 0.2 to 32,805 ft/min. 精確度 (Accuracy) ± ( 0.1 % + 1 digit ). 解析度 (Resolution) RPM 0.1 RPM : < 1,000 RPM 1 RPM : 1,000 to 9,999 RPM 10 RPM : 10,000 to 99,999 RPM m/min 0.01 m/min. : < 100 m/min. 0.1 m/min. : 100 to 999 m/min. 1 m/min. : 1,000 to 9,999 m/min. ft/min 0.1 ft/min. : < 1000 ft/min. 1 ft/min. : 1,000 to 9,999 ft/min. 10 ft/min. : 10,000 to 32,805 ft/min. 選購近接開關 Model : PX-01 應用 (Application) Sensor for PDT-2250 Panel RPM Controller, Monitor Sensor for DT-2240D Panel Tachometer Position Detector. 輸出方式 (Output method) PNP, NO(normal open) 感應方向 (Sensing direction) Vertical. 感應距離 (Sensing distance) 4 mm. 操作電壓 (Operating voltage) 10-30 VDC. 標準型感應器主體 (Standard Sensing object) Iron 18 x 18 x 1 mm. |
